氣動增壓泵利用大面積活塞端的低壓氣體驅動而產生小面積活塞端的高壓流體?？捎糜趬嚎s空氣及其它氣體，輸出氣壓可通過驅動氣壓無級調節。
The pneumatic booster pump utilizes low-pressure gas at the large piston end to drive and generate high-pressure fluid at the small piston end. It can be used to compress air and other gases, and the output pressure can be steplessly adjusted by driving the pressure.
輸出流量大：只需0.3-0.69MPa壓縮空氣驅動就可獲得較大的輸出流量。自動保壓：工作時，迅速往復工作，隨著輸出壓力接近設定壓力值時泵的往復運動速度減慢直至停止。并保持這個壓力，此時消耗能量很小，無熱 量產生，無零件運動。當壓力平衡打破后，氣動增壓泵自動開始工作到下一個平衡。
Large output flow rate: Only 0.3-0.69MPa compressed air drive is required to obtain a large output flow rate. Automatic pressure maintaining: During operation, the pump quickly reciprocates, and as the output pressure approaches the set pressure value, the reciprocating motion speed of the pump slows down until it stops. And maintain this pressure, where the energy consumption is minimal, no heat is generated, and no parts move. When the pressure balance is broken, the pneumatic booster pump automatically starts working to the next balance.
維護簡單：氣動增壓泵的零件及密封少，維護簡單且成本低。相同系列泵的所有"O"型圈，維修包易損部件可相互替換，大大降低了維修成本。氣動增壓泵出廠前已加注潤滑劑，工作時無需外部潤滑。

Easy maintenance: The pneumatic booster pump has fewer parts and seals, making maintenance simple and cost-effective. All "O" rings and vulnerable parts of the same series of pumps can be replaced with each other in the repair kit, greatly reducing maintenance costs. The pneumatic booster pump has been lubricated before leaving the factory, and does not require external lubrication during operation.
保持液壓無須消耗能量
Maintaining hydraulic pressure without consuming energy
具有防爆功能，無需電力或電線連接
With explosion-proof function, no need for power or wire connection
自身
self
結構小巧，重量輕，不受天氣變化影響5 易實現自動控制
Compact structure, light weight, unaffected by weather changes, easy to achieve automatic control
抗污染
Anti pollution
輸出靜態壓力由驅動氣壓來調節
The output static pressure is adjusted by the driving air pressure
輸出壓力達80000PSI的壓力
Output pressure up to 80000PSI
在滿負載時非常容易進行啟動停止操作
It is very easy to start and stop at full load
易安裝，操作
Easy to install and operate